|
|
|
|
| The job of cabinet assembler position was established for the purpose of assembling and installing hardware to complete final kitchen and bath cabinetry. |
|
|
| Cabinet Assembler Responsibilities: |
- Plan and organize steps of cabinet assembly
- Assemble parts together to complete cabinets
- Keep work station clean and organized
- Pick orders, fulfill orders, stock shelves of needed materials and supplies
- Other basic warehouse duties: such as sweeping, organizing, etc.
|
|
| Cabinet Assembler Requirements: |
- Ability to read a tape measure
- Basic knowledge of how to use a hammer, drill, pneumatic nail guns
- Detail oriented
- Care about building a quality product and pride in their work
|
|
| Cabinet Assembler Qualifications / Education: |
- Experience in woodworking, cabinetry or construction
- Basic construction knowledge
- Basic reading, writing and math skills
- GED or high school diploma preferred but not required
|
|
|
|
|
|
|
|
|
|
|
|
| CNC Operator Responsibilities: |
- Plans machining by studying work orders, drawings, materials, specifications and machining parameters.
- Programs machines by entering instructions, including zero and reference points, setting tool registers, offsets, compensation and conditional switches; calculating requirements, including basic math; proving part programs
- Loads feed mechanisms by lifting stock into position or assuring the automation lift is working properly.
- Verifies settings by measuring positions, first-run part and sample workpieces; adhering to international standards.
- Maintains safe operations by adhering to safety procedures and regulations.
- Maintains specifications by observing drilling, grooving and cutting; taking measurements; detecting malfunctions; troubleshooting processes; adjusting control, replacing worn tools; adhering to quality assurance procedures and processes.
- Maintains equipment by completing preventive maintenance requirements; following manufacturer's instructions, troubleshooting malfunctions; calling for repairs.
- Maintains continuity by documenting and communicating actions, irregularities and continuing needs.
- Documents actions by completing production and quality logs.
- Communicates with the programmer to make sure all cut lists are produced or to program missing parts
|
|
| CNC Operator Requirements: |
- Regular periods during which physical effort is required, walking, standing, stooping or occasional lifting of cabinet parts such as doors, frames and drawer fronts, some of which may be heavy or awkward.
- Able to work in conditions of temperature variations, fumes and moving overhead conveyor line.
- Attention to detail.
|
|
| CNC Operator Qualifications / Education: |
- High School Diploma or equivalent.
- Conceptual skills, Functional and technical skills.
- Controls and instrumentation
- Tooling
- Attention to detail.
|
|
|
|
|
|
|
|
|
| (Paint Base, Stain Base, Clear Coats) |
|
|
| Finish Sprayer Responsibilities: |
- Able to evenly or proportionately apply paint, stain or clears to a cabinet part, such as a door, panel, molding, drawer front or frame using a pneumatic spray gun.
- Meet quality standard with assistance from management and uphold integrity of a finished painted or stained product.
- Follow all safety instructions and reports any safety issues.
- Follow filter change out/cleaning procedure
|
|
| Finish Sprayer Requirements: |
- Able to work with others in a fast paced environment.
- Due to the nature of the job task, employee must stand on their feet for length of shift (with exception of breaks and lunch period).
- Perform work with minimal supervision.
- Basic knowledge of paints, stains and glaze color, (or willing to learn colors).
- Maintain a clean spray booth.
- Change or clean filters in booth as set by filter change out procedure.
- Must be in booth 15 minutes prior to start of shift (to check filters, set up booth prior to start).
- Must maintain and clean spray gun as needed during and prior to leaving at the end of shift.
- Follow company procedures, state and federal laws as pertains to using, handling, storing or disposing of paint related materials.
- Follow and use all required Person Protective Equipment.
- Willing to learn the proper mixing of paint ingredients to achieve desired color.
|
|
| Finish Sprayer Qualifications / Education: |
- Strong work ethic.
- Excellent judgement.
- Able to communicate and interact in a team environment.
- Previous spraying experience desired, the right candidate can be trained if willing to learn.
- Must be able to see colors in a spectrum (cannot be color blind)
- Willing to assist in other aspects of the finishing department as needed or assigned.
|
|
|
|
|
|
|
|
|
| The job of a had sander / tacker was established for the purpose of achieving a quality finish on wooden kitchen and bath cabinets. |
|
|
| Finishing Hand Sander / Tacker Responsibilities: |
- Sand material with sand paper, sanding block pad between paint coatings or stain coatings for smooth surface.
- Wipe off or blow off dust with a sticky tack rag or air nozzle.
- Inspect for high quality, clear consistent finish result.
- Fill defects with wood putty, then sand flush by hand as required.
- Performs work in a productive, diligent, careful and safe manner.
- Complete any special projects or other tasks as required or assigned
- Keeps work area clean
|
|
| Finishing Hand Sander / Tacker Requirements: |
- Regular periods during which physical effort is required, walking, standing, stooping or occasional lifting of cabinet parts such as doors, frames and drawer fronts, some of which may be heavy or awkward.
- Able to work in conditions of temperature variations, fumes, moving overhead conveyor line.
- Attention to detail.
|
|
| Finishing Hand Sander / Tacker Qualifications / Education: |
- Excellent judgement
- Ability to understand spoken or written English.
- Willingness to learn company process / role of position
|
|
|
|
|
|
|
|
|
| The employee will be operating a tractor and trailer, delivering kitchen and bath cabinetry. The driver is required to follow delivery routes and time schedules, loading, unloading, preparing and inspecting delivered products. |
|
| This is a Full Time position. |
|
| Truck Driver / Cabinetry Delivery Responsibilities: |
- Transporting and delivering product to customer's place of business in a safe, professional and timely manner.
- Review manifest before and after delivery to ensure that orders are complete and the customer is satisfied.
- Responsible for getting product to tailboard of trailer.
- Adhering to assigned routes and follow time schedule.
- Abiding by all transportation laws and maintaining a safe driving record.
- Follow all state and federal DOT regulations
|
|
| Truck Driver / Cabinetry Delivery Requirements: |
- Provide customer service
- Safe driving practices
- Team work oriented
|
|
| Truck Driver / Cabinetry Delivery Qualifications / Education: |
- High School diploma or equivalent
- Valid commercial driver's license
- Clean driving record
|
|
|
|
|
|
|